Purfix UltraTech Adhesive is a superior-performance adhesive that is specifically formulated for the installation of PURLINE bio-based polyurethane flooring, rubber and other approved flooring products. UltraTech performs well under rolling loads, resists indentation, and develops a strong, durable, moisture-resistant, and alkali-resistant bond. Its low volatile organic content makes it ideal for use in both residential and commercial applications. It may be used over properly prepared concrete or APA-grade plywood as well as over floors using radiant heat.
Resistant to heavy rolling loads and shrinkage
Easy to trowel for quick installation
Moisture resistance up to 95% RH
Low-VOC and low odor
Purfix UltraTech Adhesive
Packaging
Purfix UltraTech Adhesive is available in 4-gallon pails (48 pails per pallet).
Trowel Recommendations
1/16" x 1/16" x 1/16" Flat V-Notch Coverage: 125 - 145 Square Feet Per Gallon
Shelf Life
Shelf life is one year from the manufacturing date in unopened, original packaging when stored at temperatures between 65°F (18°C) and 80°F (26°C).
VOC and LEED Contribution
<50 g/L as calculated per SCAQMD Rule 1168 may contribute toward LEED® credits under LEED® v4 Credits: IEQ Credit 2.1 and IEQ Credit 2.2
Purfix UltraTape is double-sided adhesive tape for installing bio-based polyurethane resilient floor coverings including damp cementitious substrates without moisture or pH measurement. Suitable for all project sizes without area limitation.
Quick and easy installation
No moisture or pH measurement necessary
Resistant to alkaline moisture
Free of hazardous substances
Flooring can be walked on immediately
Purfix UltraTape
Packaging
Brown paper box: Length 32.64 inches (829mm) - Width 5.5 inches (141mm) - Height 2.75 inches (70mm)
Roll Size
Width 29.53 inches (75 cm) - Length 98.43 lin. ft. (30 m)
Coverage Area
242.18 sq. ft. (22.5 sq. m)
Weight
~ 11 lbs. (5KG)
Shelf Life
24 months
Color
White
Open Time
Unlimited
Setting/Cure Time
None
Ready for Foot Traffic/Move-In
Immediately after flooring installation
Miminum Application Temperature
In-service conditions: 65°F (18°C)
Seam Treatment
Can be done immediately after floor covering installation